Sewing Machine

The Makerspace has a Bernina 1008 sewing machine, several Singer 4452 sewing machines, and a Singer HD0400S sewing machine. The Repair Lair also has a Singer 4452.

Bernina 1008

A photo of the Bernina 1008 sewing machine in the Makerspace.

Threading:

1. Place thread onto post and pull it through the metal slot on the top of the machine (fig. 1).
2. Pull the thread down into the slit (fig. 1).
3. Loop the thread around the metal below the slit (fig. 1).
4. Pull the thread up and into the next metal element (fig. 1).
5. Pull the thread down and underneath the metal wire (fig. 2).
6. Thread the needle by putting the thread through the hole from front to back (fig. 2).
7. Pull the thread through the slit in the foot so it goes through the hole in the foot (fig. 2).

• 
• 

Singer 4452

A photo of a Singer 4452 sewing machine in the Makerspace.

A photo of a Singer HD0400S sewing machine in the Makerspace.

Threading:

1. Place thread onto post and pull it through the metal slot on the top of the machine (fig. 1).
2. Pull the thread down into the slit (fig. 1).
3. Loop the thread around the metal below the slit (fig. 1).
4. Pull the thread up and into the next metal element (fig. 1).
5. Pull the thread down and underneath the metal wire (fig. 2).
6. Thread the needle by putting the thread through the hole from front to back (fig. 2).
7. Pull the thread through the slit in the foot so it goes through the hole in the foot (fig. 2).

• 
•