Crescent flower earrings

From Makerpedia
Revision as of 17:38, 18 January 2024 by Ajhg (talk | contribs) (Created page with "<small>by Lydia</small> ----- __NOTOC__ {{DISPLAYTITLE:Crescent flower earrings}} Crescent flower earrings <div class='overview'> == Project Overview == I lined a resin mold with wire then set pressed flowers and metal leaf within that same mold with resin. After it cured, I attached earring fittings. {{#widget:gallery|img1=https://drive.google.com/thumbnail?id=1AGwwx6FinGVskWb8s1r5DeYNaWHJolQu&sz=w1000|img2=null|img3=null|img4=null|img5=null|n...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

by Lydia


Project Overview

I lined a resin mold with wire then set pressed flowers and metal leaf within that same mold with resin. After it cured, I attached earring fittings.

Tools and Materials


Project Files

Step-by-Step Instructions

Line the molds with craft wire

Mix the resin using the instructions on the box

Pour a layer of resin in to the mold and allow to sit for a few minutes

Place the pressed flowers and copper leaf in to the molds

Pour more resin on top to fill the mold. Allow to cure over the weekend.

Take out of the molds, and use jump rings to connect them to earring hooks