Reprovisioned Press
From Makerpedia
This is a design for a miniature printing press, adapted from the Provisional Press. It was redesigned for ease of assembly, while maintaining many of the same features.
Bill of Materials:
- Stainless Steel Mesh
- 2020 Aluminum Extrusion
- Silicone Squeegee
- Acrylic Paint (any)
- Screen Printing Ink
Safe Operating Procedure:
Before using:
- Ensure that all bolts are sufficiently tightened.
- Ensure that no debris exists in the print tray.
- Use dunnage to lift the print block to the correct height for printing. Roller should experience some resistance when rolling over the dunnage and block.
While using:
- Keep fingers clear of the roller.
After using:
- Clean up any spills, and return any dunnage to the proper area.
